DIY Recycled Pallet Wood Christmas Trees

0

Christmas is just on the horizon and I am still yet to discuss some of my preferred designs of 12 months with you! This simple DIY Recycled Pallet wood Christmas trees created from an old pallet has to be one of my all-time favorites! It has all the elements of my ideal art, a little bit traditional and a little bit new. A pallet Christmas shrub is ideal for within or outside as well! I’ve seen some really lovely DIY Wooden Pallet Christmas trees around the web lately. If you’ve got pallets relaxing around, these are a breeze to create.

I’ve got my own on my front part patio along with the pallet celebrity I created. I covered some lighting around them and boom! Immediate designs by DIY Recycled Pallet wood Christmas trees. The pallets I used were 40″ x 40″ and had 4 straight forums having the upper and lower forums together, so I got two plants out of one pallet. Based on the dimensions of your pallet and how it’s set out, you may only get one shrub. Lay the pallet down smooth and use something as an advantage to indicate where you want to cut.

Position your range so it finishes at the other end of the pallet, but before the next straight panel. Once you have cut through both sides of your shrub, the rear forums will still be linked to the straight panel. Simplest factor is to cut them off, right along the straight panel. You can pry them off if you want, but reducing them is terrible of a way to save your time. I used a discarded panel, nailed to the base for assistance. Since my pallet was so big, I turned it and got a shrub out of the spouse. It’s the same procedure again.

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

pallet wood Christmas tree

Leave A Reply

Your email address will not be published.